巻号一覧
30 巻, 1 号
選択された号の論文の4件中1～4を表示しています
- |<
- <
- 1
- >
- >|
-
山下 浩二, 城 仁士1996 年 30 巻 1 号 p. 3-12
発行日: 1996年
公開日: 2010/08/25
ジャーナル フリーIn this research, it has been examined how the images generated in the reading a drawing are involved and function in the entire act of the reading a drawing. Major results thus obtained are summarized as follows.
1) A solid in an image is approximated to some projection plan methods and the reading a drawing is done using the solid images based on respective projection styles.
2) In the images, each projection style influences the reading a drawing conversion operation process itself and the complete images of the solid generated consequently.
3) Any clear correlation is not recognized at all between respective projection styles in the images and the learning of general drawing methods in the past.
From foregoing reasons, it was considered that it is necessary not only to teach the drawing methods but also to make lectures considering the image of space and the capacity of space which are internalized as result of learning.抄録全体を表示PDF形式でダウンロード (1329K) -
―特に機械製図に関して―森 貞彦1996 年 30 巻 1 号 p. 13-24
発行日: 1996年
公開日: 2010/08/25
ジャーナル フリーTadasi Seike (1891-1974), engineer-educator of mechanical engineering, wrote several books on engineering drafting which were favorably accepted by many engineers, successively played various important roles in engineering education and industrial standardization and was decorated with an order; however, there is certain question whether he had satisfaction with his own results of endeavoring on the advancement of Japanese machine industry, because almost every entrepreneur, who would be the largest beneficiary of Seike's theory of drafting aiming at the improvement in efficiency of labor at minor factories covering the major part of the industry in the first half of the present century in Japan, showed little interest in his arguments. This paper has the purpose to solve this problem through the explanation that Seike's arguments based on the scientific thought which was very rare among Japanese were not understood by the majority thinking mythically. The difference in types of thought between Seike and others was an invisible and very hard obstacle to the attainment of his promising plan.抄録全体を表示PDF形式でダウンロード (1628K) -
近藤 誠造1996 年 30 巻 1 号 p. 25-28
発行日: 1996年
公開日: 2010/08/25
ジャーナル フリーPDF形式でダウンロード (261K) -
―透視画法の実用的応用―大西 道一1996 年 30 巻 1 号 p. 29-34
発行日: 1996年
公開日: 2010/08/25
ジャーナル フリーTadasi Seike (1891-1974), engineer-educator of mechanical engineering, wrote several books on engineering drafting which were favorably accepted by many engineers, successively played various important roles in engineering education and industrial standardization and was decorated with an order; however, there is certain question whether he had satisfaction with his own results of endeavoring on the advancement of Japanese machine industry, because almost every entrepreneur, who would be the largest beneficiary of Seike's theory of drafting aiming at the improvement in efficiency of labor at minor factories covering the major part of the industry in the first half of the present century in Japan, showed little interest in his arguments. This paper has the purpose to solve this problem through the explanation that Seike's arguments based on the scientific thought which was very rare among Japanese were not understood by the majority thinking mythically. The difference in types of thought between Seike and others was an invisible and very hard obstacle to the attainment of his promising plan.抄録全体を表示PDF形式でダウンロード (2238K)
- |<
- <
- 1
- >
- >|