日本建築学会論文報告集

表紙

原稿種別: 表紙
1977 年 253 巻 p. Cover1-
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_Cover1

ジャーナルフリー

PDF形式でダウンロード (64K)
目次

原稿種別: 表紙
1977 年 253 巻 p. Cover2-
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_Cover2

ジャーナルフリー

PDF形式でダウンロード (64K)
SI 単位の換算率表

原稿種別: 付録等
1977 年 253 巻 p. App1-
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_App1

ジャーナルフリー

PDF形式でダウンロード (36K)
CONTENTS

原稿種別: 目次
1977 年 253 巻 p. Toc1-
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_Toc1

ジャーナルフリー

PDF形式でダウンロード (72K)
奥付

原稿種別: 付録等
1977 年 253 巻 p. App2-
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_App2

ジャーナルフリー

PDF形式でダウンロード (19K)
PC 工法の生産分析 : その 5・部材組立工程労務量の分析と生産分析概念の拡張

若山滋, 川野辺道夫, 井上敬生

原稿種別: 本文
1977 年 253 巻 p. 1-7
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_1

ジャーナルフリー

抄録を表示する抄録を非表示にする

The process of the production of PC-component at factory was analysed in the former reports, in this number five report the process of the erection at site is analysed. According to the result of memo-motion work study, the standard working time and man-hours on each component positions are settled, and the relationship between man-hours and component elements which are the position, the floor lebel, the size and the form is studied by multiple regression analysis. After that, the category and the method of the production analysis is studied theoreticaly again.

抄録全体を表示

PDF形式でダウンロード (799K)
壁とスラブを含む架構の解析 (第 1 報) : 解析法と計算精度

岩下恒雄

原稿種別: 本文
1977 年 253 巻 p. 9-16
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_9

ジャーナルフリー

抄録を表示する抄録を非表示にする

This paper presents a new technique of numerical analysis for the framed structures with shear walls and slabs. The principle of the technique is based on the displacement method of the stiffness matrix analysis. The stiffness matrix of a column can be obtained by the general procedure. The framed wall is idealized to be a single structural member which has four nodal points at the corners of boundary frames of wall. Each nodal point has six displacement components (u, v, w, θ_x, θ_y, θ_z). The stiffness matrix of the framed wall can be derived by the finite element method as the solutions of the simple problems of the forced displacement at the nodal point. The stiffness matrix of a slab is equivalent to that of the wall because the slab can be considered to be the wall which is placed horizontally. By summarizing the stiffness matrices of all members, the stiffness matrix of the full structure can be derived. So the solutions under the given boundary conditions can be obtained. Comparing the calculated results by this technique with the one by the finite element method for a few types of structures and also with the experimental results for shear walls, good agreements have been obtained, so that, in conclusion, this technique can be used for the analysis of two- or three-dimensional framed structures with shear walls and slabs under the arbitrary forces.

抄録全体を表示

PDF形式でダウンロード (894K)
構造用金属材料の力学的挙動に及ぼすひずみ履歴の影響 : その 1 引張りひずみ履歴の影響

藤本盛久, 青木博文, 北脇史郎

原稿種別: 本文
1977 年 253 巻 p. 17-29
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_17

ジャーナルフリー

PDF形式でダウンロード (1181K)
3 次元薄層要素法による相互作用の解析 (梗概) (Part 1)

清水信行, 山本鎮男, 桑折能彦

原稿種別: 本文
1977 年 253 巻 p. 31-43
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_31

ジャーナルフリー

抄録を表示する抄録を非表示にする

A computational method of the three-dimensional dynamic analysis of soil-structure system are studied. This is based on the Thin Layer Elemenet Method, the semi-analytical Finite Element Method, in the cylindrical coordinates.

抄録全体を表示

PDF形式でダウンロード (762K)
空間的に変動する地震動による構造物の確率的応答

松島豊

原稿種別: 本文
1977 年 253 巻 p. 45-50
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_45

ジャーナルフリー

抄録を表示する抄録を非表示にする

The movement of ground surface during an earthquake will not be identical even in relatively limited plane, but possible to have spatial variation. According to the reference 1), the mathematical form of the cross spectral density function between ground motions, where the statistic correlation decreases in an exponential manner as the distance increases, can be regarded as the most realistic idealization. The purpose of the paper is to investigate theoretically the stochastic response of the structure subjected to multiple excitations which have the above-mentioned characteristic. The paper mainly consists of the following contents. At first the system, where a rigid slab is supported by a lot of columns, the bottom ends of which are subjected to horizontal multiple inputs, is supposed, and then the frequency response functions of the absolute acceleration of a rigid slab and of the relative displacement of columns are mathematically derived. Next the stochastic response quantities are analytically evaluated in a frequency domain in case that ground motions are assumed to be band limited white noises with spatial variation. Finally the response values due to two different noises given concretely as the simulation of typical earthquake motions are numerically estimated as examples. In conclusion the essential point of the paper lies in the fact that the spatial variation of excitations is possible to have a great ifluence upon the response of structures.

抄録全体を表示

PDF形式でダウンロード (660K)
反り変形を考えた棒理論による高層架構の解析 : その 1. 弾性静力学

日置興一郎, 山中邦一, 北野博己

原稿種別: 本文
1977 年 253 巻 p. 51-57
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_51

ジャーナルフリー

抄録を表示する抄録を非表示にする

To grasp the structural characteristics of tall multi-storey buildings subjected to lateral loads, a method of approximate analysis is proposed treating them as bar-like continuum structures which deformed under the action of not only shearing and bending but also warpng. By this method, tall wall-frame structures, such as frames with core wall and coupled shear walls, can be analyzed. The warping deformation gives more effect on the displacement at the top of core wall structures than those by bending and shearing deformation in many cases. The restriction of warping at the top increases the lateral rigidity of core wall structures. It has shown in examples that the calculated results are good approximation and the computing times are remarkably decreased by this method, comparing with the exact discrete analysis method. This method may be useful for preliminary design.

抄録全体を表示

PDF形式でダウンロード (670K)
ケーブル・ネット構造物の施工時解析 : その 1, ケーブル張力導入解析

坪田張二, 相澤恂

原稿種別: 本文
1977 年 253 巻 p. 59-67
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_59

ジャーナルフリー

抄録を表示する抄録を非表示にする

Following two kinds of analysis are essential to establish a theoretical erection system of cable net structures; 1) analysis for obtaining the normal ercetion state defined by excluding all imaginable errors arising in erection process 2) analysis for eliminating actual errors which deviate from this normal state. First of all, this paper presents the analytical method for calculating the normal erection state. Concretely, the cable tensions to be prestressed are selected as the main control parameter and these cable tensions are calculated successively according to the sequence of placing cables. In this analysis the unstrained length of cables or members is considered to be the known parameter and the geometrical shape of net surface and tension distribution are obtained from equilibrium equations at free nodes and compatibility equations of cables length. Furthermore, not only the usual analysis of clamped nodes type where the cables intersections are clamped but also the analysis of sliding nodes type where the cables intersections are able to slip against each other are developed in this paper. These two types of analysis are illustrated and compared by the example of H.P. type cable net structures. Finally, from this analysis we can certify a safety of erection procedure and specify a sequence of placing cables to avoid overstressing the supporting structures.

抄録全体を表示

PDF形式でダウンロード (1008K)
部分球形殼挫屈解析序論

角野晃二, 秋月清

原稿種別: 本文
1977 年 253 巻 p. 69-79
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_69

ジャーナルフリー

抄録を表示する抄録を非表示にする

Axisymmetrical snap buckling behavior of elastic clamped shallow spherical shells.-perfect and with axisymmetric initial imperfections-, are studied. An analysis has been treated by employing the Galerkin method based on the governing nonlinear differential equations with respect to meridional and normal displacements u, w and numerical results obtained here, are compared with those of previous analytical and experimental studies. Briefly speaking of a remarkable point, it is found that the snap buckling pressures are almost lower than Linear classical buckling pressure in the ranges of high waviness deformation modes.

抄録全体を表示

PDF形式でダウンロード (869K)
熱電対による表面温度測定について

宮野秋彦, 小林定教

原稿種別: 本文
1977 年 253 巻 p. 81-89
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_81

ジャーナルフリー

抄録を表示する抄録を非表示にする

This paper concerns the errors involved in measuring surface temperature by sticking a thermocouple on the surface of building materials or building walls. The main causes of the errors are as follows : (1) the radiation character of sticking materials; (2) the heat conductivity of sticking materials; (3) the heat conductivity of a thermocouple. The results of our experiments show i) that it is desirable to make the width of sticking materials as short as possible because the sticking materials disturb the distribution of surface temperature, ii) that when the sticking length of a thermocouple is 100 to 150 times the diameter of the thermocouple, the measurement value is almost constant, and iii) that the heat character of measurement objects, that of sticking materials, wind, and radiation have a considerable effect on the measurement temperature. Thus we have obtained a better measuring method of reducing the errors.

抄録全体を表示

PDF形式でダウンロード (894K)
熱ふく射が人体に及ぼす影響を評価するための人体モデルとしての直方体と矩形面との間の形態係数に関する研究 (梗概) : その 1. 直方体に対する形態係数の算出

堀越哲美, 小林陽太郎

原稿種別: 本文
1977 年 253 巻 p. 91-102
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_91

ジャーナルフリー

抄録を表示する抄録を非表示にする

人体を直方体(0.4m×0.2m×1.2m)とした時に, 直方体と矩形面との間の形態係数を数値計算を行って求めた。これらの結果を図表として示し, それらの応用のための例題を示した。上述の形態係数と, 他の人体や等価的な単純立体のモデルに対する形態係数との比較や直方体Rの面α, β, γそれぞれと矩形面δの間の形態係数については, 次報で述べる予定である。

抄録全体を表示

PDF形式でダウンロード (1076K)
建築設備計画における給水負荷算定法に関する研究 : その 4・同時使用の解析と給水負荷の算定

村川三郎

原稿種別: 本文
1977 年 253 巻 p. 103-112
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_103

ジャーナルフリー

抄録を表示する抄録を非表示にする

This paper is described the probabilities of simultaneous uses and the calculation results of water load. The probabilities of simultaneous uses are analysed with the Monte Carlo Simulation and the results of the investigations. Based on these analysed results, the distributions of the probabilities are shown in the poisson distributions. And using the above results and basic deta, the following calculation results are shown and analysed. 1. The number of simultaneous uses of water in variable uses. 2. The number of sanitary fixtures to install in the buildings. 3. Water flow rates of simultaneous uses. 4. Water flow rates of consumption per hour in variable uses.

抄録全体を表示

PDF形式でダウンロード (1169K)
既成住宅地の更新実態と居住者の意識 : 既成住宅地の更新過程に関する研究・その 1

高見沢邦郎

原稿種別: 本文
1977 年 253 巻 p. 113-120
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_113

ジャーナルフリー

抄録を表示する抄録を非表示にする

This paper is primarily concerned with the renewal process of housing and housing sites in the urban residential areas. The areas surveyed are apparently considered to have desirable environments, but the urban renewal plans now under way have come to raise possibilities that may deteriorate the housing conditions there. The purpose of this study is to find the main factors involved in such urban renewal process. The researches on which this paper is based were conducted in Meguro and Setagaya Wards, which are typical of urban housing areas in Tokyo, and cover the periods 1962-1971 and 1969-1974 respectively. The findings obtained may be summarized as follows : (1) Housing reconstruction and land subdivision are the two factors that can be witnessed on an extensive scale in the areas surveyed. (2) The subdivision of housing sites and the increase in the number of apartment buildings in the areas covered have combined to deteriorate the housing conditions there. (3) The inhabitants in the areas concerned have shown a negative attitude toward the projected changes of environment.

抄録全体を表示

PDF形式でダウンロード (1054K)
公営住宅に関する基礎的研究 : その 6, 公営住宅入居による居住水準変化

玉置伸[ゴ], 金木健

原稿種別: 本文
1977 年 253 巻 p. 121-132
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_121

ジャーナルフリー

抄録を表示する抄録を非表示にする

This report deals with the reason why dwellers have selected public housing, and the extent to which their living conditions have been improved by moving to public housing. The conclusions are as follows; 1) The level of living conditions of applicants for public housing has been improving slowly. The area of living space of applicants varies with the regions. It is higher in a provincial city than in a metropolis, which is a reflection of regional housing conditions. 2) In a metropolis, public housing dwellers have selected their present houses because their rents are lower. On the other hand, in a middle-sized city or a rural town, the reasons for their moving to public housing have been mainly because of marriage and occupational needs. 3) The low house rent is the major advantage which dwellers consider of public housing. More than a half of them appreciate its low rents. On the other hand, the dwellers who appreciate the living floor space of public housing are many in a metropolis, but few in a rural town. 4) That is, many dwellers have acquired better living conditions in comparison with their former by moving to public housing in a metropolis, but only a few in a provincial city or in a rural town. 5) Accordingly, the length the residents keep on living in public housing is longer in a metropolis and a industrial city than in a provincial city or a rural town.

抄録全体を表示

PDF形式でダウンロード (1531K)
海運橋三井組為替座御用所の建築について

初田亨

原稿種別: 本文
1977 年 253 巻 p. 133-140
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_133

ジャーナルフリー

抄録を表示する抄録を非表示にする

The objective of this study is to show historical characters of the Mitsui-gumi House at Kaiun-bashi that mixed the European style with the Japanese style in the early Meiji Era. The early Meiji Era was times when Japanese encountered European civilization and advanced European technology. A summary will be given as follows; 1) The House was built in 1872 as a social status symbol of the Mitsui-gumi. 2) The House had mixed styles : one copying the European style and another copying the Japanese style of the feudal times. 3) The owner meant to use the European style for the House, which would bring prosperity to him. 4) The owner used positively the Yatsumune-Zukuri for the roof of the House that was an element of Japanese castles in the feudal times.

抄録全体を表示

PDF形式でダウンロード (1199K)
江戸日本橋町人地の幕藩制的構造 : 江戸町人地の研究 (2)

玉井哲雄

原稿種別: 本文
1977 年 253 巻 p. 141-148
発行日: 1977/03/30
公開日: 2017/08/22

DOIhttps://doi.org/10.3130/aijsaxx.253.0_141

ジャーナルフリー

抄録を表示する抄録を非表示にする

前章では沽券絵図を主な史料として, 江戸町人地の基礎が町屋敷であることを示した。また, その町屋敷の沽券金高が元禄期から重視され始め, それが幕末に到るまで幕府の江戸町方政策に重要な意味をもっていたことを示した。本章ではこの沽券金高の江戸日本橋町人地, 及びその周辺における地域的分布とその年代的な変化を調べることにより, 江戸町人地におけるこの地域の構造, およびその変質過程の内容をさぐってみたい。

抄録全体を表示

PDF形式でダウンロード (1041K)

J-STAGEへの登録はこちら（無料）