巻号一覧
前身誌
39 巻, 1 号
選択された号の論文の29件中1～29を表示しています
- |<
- <
- 1
- >
- >|
-
井上 良雄1985 年 39 巻 1 号 p. 1-2
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーPDF形式でダウンロード (1857K) -
黒沢 易彦1985 年 39 巻 1 号 p. 5-9
発行日: 1985/01/01
公開日: 2010/02/09
ジャーナル フリーPDF形式でダウンロード (9831K) -
井上 良雄1985 年 39 巻 1 号 p. 10-15
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーPDF形式でダウンロード (2675K) -
上埜 武夫, 住本 昌之, 門屋 卓1985 年 39 巻 1 号 p. 19-21
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーPDF形式でダウンロード (469K) -
大江 礼三郎1985 年 39 巻 1 号 p. 23-25
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーPDF形式でダウンロード (437K) -
小宮山 恵三郎1985 年 39 巻 1 号 p. 26-28
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーPDF形式でダウンロード (390K) -
小室 正夫1985 年 39 巻 1 号 p. 29-32
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーPDF形式でダウンロード (678K) -
武 祐一郎1985 年 39 巻 1 号 p. 33-37
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーPDF形式でダウンロード (1064K) -
大江1985 年 39 巻 1 号 p. 38-40
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーPDF形式でダウンロード (610K) -
大山 繁1985 年 39 巻 1 号 p. 41-51
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーThe construction of new evaporator and No. 5 recovery boiler were acommplished May. 1983 at Ishinomaki mill of Jujo Paper Co., Ltd.
The evaporator is 7 body 7 effect equipment and No. 5 recovery boiler is altered to Scandinavian type from American type.
As the result, We have achieved much energy saving and stabilization of recovery process operation.抄録全体を表示PDF形式でダウンロード (1137K) -
武中 元1985 年 39 巻 1 号 p. 52-56
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーThe absorption heat pump was installed to recover the lower potential heat from the warm wastewater at the bleaching plant and it heats up the boiler feed water from 22°C to 80°C at Nomachi Mill, Chuetsu Pulp Industry Co., Ltd.
This system saves 1, 800 kl of fuel oil in a year.抄録全体を表示PDF形式でダウンロード (644K) -
小川 勝義, 竹下 勇吉, 伊東 速水, 永井 千秋, 奈倉 道博1985 年 39 巻 1 号 p. 57-64
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーResearch Association of Pulp and Paper Technology has started R & D of ferric oxide direct causticization process which enables the abbreviation of conventional lime kiln thus saving oil consumption in pulping industry.
For the recovery boiler, we study 3 types of furnace, fluidized bed, fixed bed, and spouted bed. We are now in the stage of bench scale study whose capacity is 120 kg/h dry based solids. Among 3 types stated above, the fluidized bed system seems promising from the data obtained through labo and bench scale investigations.
The authors describe the R & D procedure for the fluidized bed process, and show the results of bench scale study mainly obtained with 500 mm square diameter fluidized bed.抄録全体を表示PDF形式でダウンロード (6126K) -
中野 達男, 永東 秀一, 奈倉 道博1985 年 39 巻 1 号 p. 65-69
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーAs a member of the Research Association of Pulp and Paper Technology established in September, 1982, our group is engaged in improving the technology of high solids concentration of black liquor.
Our studies are being carried out according to the following schedule.
19831984 : Bench-scale experimemt (120 B.D. kg/hr)
1984 : Construction of pilot plant (417 B.D. kg/hr)
19851986 : Operation of pilot plant
Disc Evaporator has been developed in order to obtain high concentration black liquor.
By using Disc Evaporator, we have produced 8090% DS black liquor.
Boiling point rise and viscosity of high solids black liquor are presented.
The economic aspects are roughly considered, because the objective of bench-scale experiment is to identify possible means for concentrating black liquor to higher solids level.
Pilot scale studies, in 1985, will define the economy and energy efficiency of Disc Evaporator.抄録全体を表示PDF形式でダウンロード (2770K) -
野田 栄三1985 年 39 巻 1 号 p. 70-73
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーPresent paper reviews on current technology trends of ;
1. Direct platemaking by electrophotography.
2. Direct platemaking by DTR (Diffusion Transfer Reversal) System.
3. Outlook on laser technology and color in-plant printing.抄録全体を表示PDF形式でダウンロード (453K) -
原 浄降1985 年 39 巻 1 号 p. 74-77
発行日: 1985/01/01
公開日: 2010/02/09
ジャーナル フリーPDF形式でダウンロード (671K) -
杉本 守1985 年 39 巻 1 号 p. 78-81
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーIn Japanese Newspaper Industry, the consumption of lighter weight newsprint have, rapidly, been increasing for saving raw materials.
In using the lighter weight newsprint for the letterpress newspaper printing, the strike through problems are unavoidable. Therefore, we have been trying to develope the water based news ink which, we presumed, would be the most appropriate to overcome the strike through problems.
The studies describe the formulas and printability data of water based news ink. Further, the experimental tests had been attempted so often to evaluate the printability of the water based news ink on our “N-600” High Speed Newspaper Printing Experimental Machine.
Finally, we will continue its extensive research and development for the water based news ink.抄録全体を表示PDF形式でダウンロード (2215K) -
伊藤 良彦1985 年 39 巻 1 号 p. 82-91
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーThe micro-voids which are made by being entangled with fiber made the complicated porous structures on paper surface and inside paper. This porous structure is one of the most fundamental property, and is closely related to printability of paper.
In this paper, the measurement methods and examples of their results of porosity, distribution of capillary tubes and distribution of surface roughness are showed and described and then the outlines of their relationes to ink transfer, printing smoothness, ink penetration and print quality are described.抄録全体を表示PDF形式でダウンロード (8611K) -
大門 淑男1985 年 39 巻 1 号 p. 92-99
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリー内添紙力増強剤、スプンースターチ、表面サイズ剤、コーティングバインダーなど製紙工程のあらゆる分野に使用されるスターチ製品を取り揃え、高度な品質、豊富な技術サービスともども製紙各社からご愛顧を賜っています。抄録全体を表示PDF形式でダウンロード (12229K) -
市川 行紀1985 年 39 巻 1 号 p. 100-104
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーThe Eur-Control Chip Lab moisture meter has been installed in the Yufutsu Mill.
It has proven its ability to effectively measure chip quality.
Its reading is used to adjust the white liquor flow to maintain an optimum liquor-to-wood ratio.
This results in an improvement of the quality and uniformity of the pulp.抄録全体を表示PDF形式でダウンロード (687K) -
山田 裕良1985 年 39 巻 1 号 p. 105-111
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーOji Paper Co. Ebetsu mill has introduced Kamyr's Pressure Diffuser into the blow line of Kamyr continuous digester to improve the washing efficiency. At the beginning of operation, an expected result had not been obtained especially in the case of hard wood pulping. Through the succesive improvements in the mechanics, our purpouse has been achieved sufficientry.抄録全体を表示PDF形式でダウンロード (1066K) -
木村 邦昭1985 年 39 巻 1 号 p. 112-117
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーThe Eo bleaching system for the eucalyptus line of our mill has started up in August 1983.
The main variables studied in our mill experiments were O2 charge, end pH in the E stage and conditions of chlorination.
O2 charge seems to have no remarkable effect on the Kappa number reduction when it exceeds 0.15% on pulp.
The Kappa number reduction depends on the pH in the E stage and the C stage Kappa number.
The result of our experiments showed a decrease of approximately 0.13 Kappa number units per one pH unit.
And when the C stage Kappa number is 6.0, the Kappa number after Ho bleaching is reduced about 0.5 units than only extraction.抄録全体を表示PDF形式でダウンロード (912K) -
棚橋 光彦, 樋口 隆昌1985 年 39 巻 1 号 p. 118-127
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーSteam explosion process for wood is an efficient pretreatment method for wood refinary. The present paper discussed on the physical and chemical characteristics of exploded wood, and efficient utilization of easily separated components from the exploded wood. Future development of the steam explosion process of wood was also discussed in relation to pulping, wood saccharification, productions of cattle feed and wood plastics.抄録全体を表示PDF形式でダウンロード (10895K) -
柳川1985 年 39 巻 1 号 p. 128
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーPDF形式でダウンロード (1666K) -
高橋 貞春1985 年 39 巻 1 号 p. 129-132
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーWe developed a sheet transfer equipment which was based on a new design conception.
It was devised as system which was comparatively easy to be set on a conventional open draw paper machine.
Using a plastic-fabric, a stationary suction pick up box and a transfer box are the principal composer elements.
Functional features are : extremely good stability by low vacuum long life of the plastic-fabric and lower running costs, and so on.抄録全体を表示PDF形式でダウンロード (5435K) -
藤岡 康雄1985 年 39 巻 1 号 p. 133-139
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーFollowing topics are covered in this paper.
1. Efficient dehydration with the ENP
2. Improvement of paper quality with the ENP
3. The methods and points to attend to in operating the ENP抄録全体を表示PDF形式でダウンロード (1102K) -
中田 幸次郎1985 年 39 巻 1 号 p. 140-152
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーCalcium carbonate industry in Japan has been established and developed with limestone resources of high quality produced richly for background. Calcium carbonate is divided into the following two main classes : ground limestone (GL), a product manufactured by pulverising limestone and classifying, as well as precipitated calcium carbonate (PCC), a product manufactured by calcinning limestone, making milk of lime and reacting it with carbon dioxide gas to settle.
This report describes the utility of calcium carbonate in neutral papermaking. Some considerations are given on (1) existing condition of calcium carbonate, (2) properties of calcium carbonate-filled paper, (3) wire life, (4) sizing in neutral papermaking.抄録全体を表示PDF形式でダウンロード (12077K) -
野村 忠義, 金森 悠二, 安部 英人, 小林 潤, 屋城 修, 浅井 良弘1985 年 39 巻 1 号 p. 153-166
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーThis paper includes high efficiency drying process and high dew point air system process.
(1) Taking aim at installation area reduction, we have been developing a high efficiency drying process with high drying rate. Among the factors affecting drying rate, important are.
Pressure in vacuum chamber laid on the dryer cylinder surface
Temparature of dryer cylinder
(2) Taking into consideration the extent of 5% energy saving per 10°C lowering of dew point as a rule, the elements available for the high dew point drying has been developed. On a bench scale, we developed the following useful elements.
The high adiabatic hood panel with heat radiation lowered to one third level of its original
The low cost and compact heat transfer element with wave like structure available for the cross flow and periodic heat exchanger抄録全体を表示PDF形式でダウンロード (1739K) -
飯森1985 年 39 巻 1 号 p. 167
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーPDF形式でダウンロード (1795K) -
1985 年 39 巻 1 号 p. 168
発行日: 1985/01/01
公開日: 2009/11/16
ジャーナル フリーPDF形式でダウンロード (110K)
- |<
- <
- 1
- >
- >|