ITE Technical Report
Online ISSN : 2424-1970
Print ISSN : 1342-6893
ISSN-L : 1342-6893
22.35
Showing 1-17 articles out of 17 articles from the selected issue
  • Type: Cover
    Pages Cover1-
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    Download PDF (16K)
  • Type: Index
    Pages Toc1-
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    Download PDF (76K)
  • Yuko Fukuda, Masayo Okamoto, Katsunobu Nishihara, Hideo Nagatomo, Atsu ...
    Type: Article
    Pages 1-6
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    In Research of Inerttial Confinement Fusion(ICF), computer simulation has been given an important role. Since the output data from the computer simulation is increased according to the recent rapid progress in speed and main memory of super computers. Here we report some examples and difficulties of scientific visualization in our research.
    Download PDF (946K)
  • Isamu Niki, Kazuhisa Fujita, Hiroaki Nishimura, Mitsuo Nakai, Ingo Usc ...
    Type: Article
    Pages 7-12
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    We developed a monochromatic X-ray fast framing camera to observe plasma formation and temperature distribution of a laser fusion plasma. The camera consists of an X-ray imager using toroidally bent crystals and a X-ray fast framing camera, providing temporal(30ps), spatial(10μm), and spectral(20eV)resolutions. Described here are the principle and performance of the camera. Application to other fields is also mentioned.
    Download PDF (598K)
  • Kenji Ito, Kaoru Adachi, Osamu Saito, Hiroshi Tamayama
    Type: Article
    Pages 13-17
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    This Paper presents a signal processing system for newly developed high-resolution digital camera, MX-700. This camera is composed of a 1/2 inch, 1.5M pixels CCD, dual RISC processors, SmartMedia and a digital signal processor LSI. The digital signal processor includes AE/AWB/AF function, high-resolution signal processing, peripherals for the RISC processor, digital encoder, D/A converter and SmartMedia controller. The LSI achieves compact, low power and high-resolution image acquisition system. The image data is recorded on SmartMedia which is small, thin, inexpensive and suitable for the digital camera. The RISC processor includes an internal DRAM and achieves high-speed operation. The outlines and main features of the signal processing system are described
    Download PDF (541K)
  • Tatsuya Yamamoto, Yoshio Saitoh, Yukio Satoh
    Type: Article
    Pages 19-24
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    Excimer lasers are expected to be a useful tool for micro-processing of advance electric circuit board etc., because of its ability of short wavelength and short pulse. In these micro-processing, a mask imaging system is generally used. But in the conventional mask imaging system, most of laser power is reflected at the surface of the patterned mask, because of the slight open area ratio of the mask. It causes one of the large barrier to extend the market of an excimer laser for micro-processing. In order to overcome this problem we have developed a new laser machining system with H.O.E. The system is able to increase the mask transmission rate greatly by irradiating the laser power only around the mask open area using a H.O.E. As a result we have succeeded in increasing the net laser power at a work more than 10 times larger compared with conventional system.
    Download PDF (817K)
  • Hiroshi Inoue, Akihiro Isaji, Yasuo Yoshida, Katsuhiko Hayashi
    Type: Article
    Pages 25-30
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    A system for the visualization of the surface figure of a stone around the bored hole drilled under ground for the test is experimentally studied using ultrasonic pulse-echo method. The purpose of this paper is focused to visualize the surface of stone of few 10cm diameter in the sand under underground water, which less attenuate the ultrasonic wave than in dry sand. The attenuation in the sand under water was measured for the discussion of penetration of the ultrasonic, and then the transmission through the pipe material of bored hole was also estimated. An example of visualization of the model object was performed to confirm the possibility of this method for near surrounding of the hole.
    Download PDF (618K)
  • HIDEO SAITO
    Type: Article
    Pages 31-36
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    Liquid Crystal Displays(LCDs)are of features as low power consumption and thin size display. All the more for such features, LCDs have remarkably developed and come into applications as displays used in offices, private homes as well as for outdoors. LCDs have practically become large in their size and their wide viewing angle has been improved on account of various new display modes. Fluorinated LC materials have been evaluated to be most suitable for TFT-LCD use, various fluorinated LC materials have been under development one after another.
    Download PDF (558K)
  • Tadashi Kawamura, Tetsuya Miyashita, Tatsuo Uchida
    Type: Article
    Pages 37-42
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    Anchoring strength is an important parameter to fabricate LC devices. The surface order parameter is necessary for elucidating the anchoring and the liquid crystal alignment mechanism. But, there left a lot of unclear factors for align liquid crystals, because there is no suitable method to measure the surface order parameter quantitatively. The phase transition droplet method newly proposed in this report that is confirmed to measure the surface order parameter quantitatively. Moreover, an model to explain the decrease of order parameter which is increased by rubbing is proposed and the calculated result is agree well with the experimental value. We also found clarify that the alignment layer with no rubbing also has small order and it decreases by the plasma processing.
    Download PDF (656K)
  • L. Xuan, H. Ueno, T. Miyashita, T. Uchida
    Type: Article
    Pages 43-48
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    The anchoring mechanism at the surface has not been completely clarified, yet. In this work, the relation between order parameter of the alignment and the elastic constant based on the mean field theory was used to analyze the surface anchoring mechanism. The result indicates that the alignment surface affects several nm into the liquid crystal layer where the order parameter is changed and it causes the change of the elastic constant. From this result, S shaped distribution of the director in a twist alignment was deduced. This distribution suggests that the anchoring strength measured until now is the effective anchoring strength. The theoretical analysis was proved firstly by a good agreement between the experimental and calculated results.
    Download PDF (519K)
  • A. Takeda, S. Kataoka, T. Sasaki, H. Chida, H. Tsuda, K. Ohmuro, T. Sa ...
    Type: Article
    Pages 49-53
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    An MVA-LCD(multi-domain vertical alignment LCD)that provides super-high image quality has been developed by newly introduced rubbing-less technology. A newly introduced "protrusion" designed on the TFT stbstrates and on the color filter substrates automatically controls the directors of the LC molecules. By this technology we have successively developed four-domain 15"MVA-TFT units that provide extremely wide viewing angle of more than 160 degrees, a high contrast ratio of 300 : 1 or more and a fast response of less than 25ms.
    Download PDF (472K)
  • T. Inoue, M. Ise, H. Kikukawa, S. Mikoshiba
    Type: Article
    Pages 55-60
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    High density recording on a thermally addressable smectic A liquid crystal panel was performed by using an over-write technique. By optimizing the recording conditions, a horizontal spatial resolution as high as 333 line-pairs/mm was obtained at a diffraction efficiency of 1%. When the spatial resolution was less than 62.5 lp/mm, the diffraction efficiency was 18%.
    Download PDF (514K)
  • R. Yamaguchi, Y. Ito, Y. Sato, S. Sato
    Type: Article
    Pages 61-66
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    Multicolor fluorescent liquid crystal(LC)displays are proposed using the UV light emitting diode as an excitation source. The fluorescent LC cells are prepared by mixing a cholesteric LC and a blue or green dichroic guest phosphor, and a green or red fluorescent film is stacked on the LC cell. When an applied voltage across the LC cell increases, the light intensity of the fluorescent LC cell decreases and that of the external fluorescent film increases due to the increase of the transmission intensity of the UV light. The multicolor switching is also demonstrated in the triple-layered cell ; two LC layers(blue and green) and one fluorescent film(red).
    Download PDF (584K)
  • Yasuyoshi Mishima, Katsuyuki Suga, Fumiyo Takeuchi
    Type: Article
    Pages 67-72
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    Excimer laser-annealed polycrystaline silicon(poly-Si) films have been investigated. The uniformity of these films was mainly determined by pulse-to-pulse laser energy fluctuations and beam profiles. The native oxide of a-Si films also influenced the surface roughness of poly-Si films. The fluctuation of crystallinity in the threshold region exerts a strong influence on the TFT characteristics. Because the crystallinity of laser-annealed poly-Si has a narrow threshold energy region, the improvement of the uniformity of the TFT characteristics is needed more exact control of crystallization parameters.
    Download PDF (483K)
  • Men-Tao He, Toshiaki Nose, Susumu Sato
    Type: Article
    Pages 73-78
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    A liquid crystal(LC)grating with a surface relief structure is reported. This liquid crystal grating is fabricated with UV irradiation through a grating photo mask using a mixture of liquid crystal and prepolymer materials. The grating structure of this polymer/LC grating is observed by a polarizing microscope and a scanning electron microscope(SEM), and electrooptical properties are measured. The groove depth which is controlled by the energy of the UV irradiation is also discussed.
    Download PDF (637K)
  • Keiichi Sueda, Motoyuki Okuo, Kouji Tsubakimoto, Noriaki Miyanaga, Mas ...
    Type: Article
    Pages 79-81
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    In the laser fusion driver, the laser beam propagates through a long distance and passes a lot of optical components. The beam tth sharp edge profile acquires diffraction ripples. These ripples induce the self-focusing in optical components. Thus the intensity nonuniformiy causes the damage of optical components. To overcome this problem, we are investigating the liquid crystal optics to produce a super Gaussian beam with a smooth edge profiles by controlling the polarization. The fabricated serrated apodizing aperture provided a significant improvement of beam quality, and this technology would be quite useful for controlling the beam profile.
    Download PDF (412K)
  • Type: Appendix
    Pages App1-
    Published: June 25, 1998
    Released: June 23, 2017
    CONFERENCE PROCEEDINGS FREE ACCESS
    Download PDF (82K)
feedback
Top