繊維学会誌
Online ISSN : 1884-2259
Print ISSN : 0037-9875
42 巻, 3 号
選択された号の論文の11件中1~11を表示しています
  • 中前 勝彦
    1986 年 42 巻 3 号 p. P67-P72
    発行日: 1986/03/10
    公開日: 2008/11/28
    ジャーナル フリー
  • 島村 薫, 横山 文義
    1986 年 42 巻 3 号 p. P73-P81
    発行日: 1986/03/10
    公開日: 2008/11/28
    ジャーナル フリー
  • 川端 季雄
    1986 年 42 巻 3 号 p. P82-P89
    発行日: 1986/03/10
    公開日: 2008/11/28
    ジャーナル フリー
  • 海谷 法博, 釘嶋 正弘, 高原 淳, 梶山 千里
    1986 年 42 巻 3 号 p. T127-T135
    発行日: 1986/03/10
    公開日: 2008/11/28
    ジャーナル フリー
    高密度ポリエチレン固体押し出し物の疲労挙動を,未押し出し物の場合と比較検討した。固体押し出し物は,押し出し比の増加と共に分子鎖の配向の向上を示し,弾性率,破断強度も増加した。疲労寿命は押し出し比の増加に伴い,同一歪振幅では減少し,同一応力振幅で比較すると増加した。また,疲労破断面は,未押し出し物で変形方向に垂直,押し出し物では45°の傾きを示した。未押し出し物は球晶構造を有するため,クラックは変形方向に垂直に伝播した。一方,押し出し物は高度に配向した微結晶を有するため,繰り返し変形下に生じるせん断歪により結晶間の滑りを生じ,この結果,傾いたキンクバンドが形成される。押し出し物の疲労破壊は,主にこのキンクバンドに沿って生じるために破断面は変形方向に対し45°傾いている。未押し出し物で低歪振幅において観測される破断直前におけるE′の極大及びtan δの極小は,繰り返し変形による分子鎖の配向を示している。他方,押し出し物の場合にはこのような挙動は観測されない。これは,固体押し出しによりすでに分子鎖が高度に配向しているためである。動的粘弾性関数の疲労時間依存性の測定より求めたヒステリシス損失に基づく疲労破壊規準式は次式により表わされる。(Hav-H0)・tf=Cここで, Havは疲労中の平均ヒステリシス損失, tfは疲労寿命, H0は疲労限界ヒステリシス損失, Cは破壊に至るまでのヒステリシス損失量の総和を示す。この関係式より求めたC及びH0の値より,固体押し出しにより耐疲労性が向上することが明らかとなった。
  • 第I報 セルロース系繊維の等温収脱着曲線
    木幡 徳知, 宮川 真利子, 高岡 昭, 河合 弘廸
    1986 年 42 巻 3 号 p. T136-T154
    発行日: 1986/03/10
    公開日: 2008/11/28
    ジャーナル フリー
    天然,再生および化学修飾を含む12種類のセルロース系繊維の等温水分収脱着曲線を, 10~15°Cの種々の一定温度で秤量瓶法および収着ばかり法の二つの方法で測定し,次の解析結果をえた。
    1) 収着曲線の温度依頼性より,吸湿過程の過剰エネルギー(エントロピー項)を求め,その値が乾燥状態で最も大きく,液相水換算で約100cal/gに達し,吸湿と共に急減するが,飽和吸湿に近い状態でもなお有限の値をもち零でないこと,換言すれば収着された水は乾燥状態において極めて高い規則性をもって吸着されており,飽和に近い状態でもなお自由水に比較して拘束された状態にある。
    2) 30°Cにおける等温収着曲線をBETの有限多分子層吸着理論によって解析し, BETパラメータνm, Cおよびnの値を各試料について比較検討した。実験曲線に最も近接する層数nmaxの値は三酢酸レーヨン4,部分Na. c. m. c.化レーヨンの7を除いて,すべて6と解析され,吸着水をn=1(単分子層吸着), nmaxn>1 (多分子層吸着), n>nmaxの3種に分類しうる。
    3) 広幅プロトンNMRスペクトルの狭線幅成分の線幅の吸湿依存性にあらわれる転移がほぼ(nmax-1)に対応し, n>(nmax-1)の吸着水がなお自由水に比較し運動性が若干拘束されたものであることなど, 1)の熱力学的解析を支持する結果をえた。
  • 第1報 鉛直円柱によるシミュレーション
    鎌田 佳伸, 加藤 豊文, 安積 弘充, 渡辺 晋二
    1986 年 42 巻 3 号 p. T155-T162
    発行日: 1986/03/10
    公開日: 2008/11/28
    ジャーナル フリー
    熱工学的見地から,人体からの対流熱伝達率を調べた。風洞内に設置された円筒状熱源を用いて,その対流熱伝達率の実験式を得た。その式は,気流が速い時には,強制対流に対するDouglasとChurchillの式に一致する。その式を用いて,我々は気流速度,人体の太さ及び人体と周囲流体との間の温度差を関数とする人体からの対流熱伝達率を決定するさらに有益な式を導いた。その熱伝達率は気流速度と共に急速に増大する,また,人体の太さが増加するに従い減少するがその減少の割合は次第に小さくなるという知見も得た。
  • 真下 智司, 竹田 和浩, 木下 隆史, 山口 良雄, 小西 孝
    1986 年 42 巻 3 号 p. T163-T168
    発行日: 1986/03/10
    公開日: 2008/11/28
    ジャーナル フリー
    The change in structure of the stretched and heat set PET cord and the PET cord-rubber composite was discussed by means of the results of load-extension and stress relaxation measurements.
    Test specimens were the PET cords treated under stretching ratio (L/L0) of 1.04-1.10 and heat set temperature of 200°C-240°C (=sample A), the composite consisting of sample A and the polychloroprene rubber matrix (=sample B), and the cord picked up from the sample B (=sample C).
    The relaxation modulus of sample A and sample B increased with increasing heat set temperature and stretching ratio. In the cases of much higher stretching ratios, the relaxation modulus of sample A decreased with stretching ratio. The relaxation modulus of sample B was higher than that of sample A.
    From these results, the stretching and heat set of the cords seems to create defects by the rearrangement of molecular chains. These behavior tend to be remarkable under the heat treatment condition of lower heat set temperature and higher stretching ratio. The number of defects seems to decrease with heat treatment by curing.
  • 伊藤 泰輔, 勢田 二郎
    1986 年 42 巻 3 号 p. T169-T176
    発行日: 1986/03/10
    公開日: 2008/11/28
    ジャーナル フリー
    The volume occupied by a molecule was defined in two different ways: one, denoted by Vnet, is the net volume for the van der Waals' contact model for the molecule which was constructed by the use of the bond lengths, the bond angles and the van der Waals' radii of the constituent atoms, and the other, Vcry., is the mean volume occupied by the molecule in the crystalline state.
    A program was developed to give an accurate estimation of Vnet in which the number of a small cell having a volume increment of ΔxΔyΔz was computed within the range inside the van der Waals' contact model. The Vnet calculated in this way was denoted by Vlp.. Calculations of Vlp. were carried out for 12 azo and 6 anthraquinone compounds and the results were compared with the values of VKi. and VEd. which were obtained according to Kitaigorodskii's and Edward's methods, respectively. In these two methods, the volume increments specified to the atom or atomic group were summed up along the whole molecule. In spite that VKi. (and VEd.) neglects the overlapping of the van der Waals' contact spheres between nonbonded atoms within a molecule, it was surprising to find that VKi. showed a good agreement with Vlp. respecting to the above aromatic molecules. VEd. gave values several % smaller than Vlp.
    Vcry. can be experimentally determined by density measurement (Vρ). It can also be calculated from the unit cell volume and the number of the molecules in the cell (VX). For flat molecules such as those examined in the present study, it was found that Vcry. can be predicted well from the area of the silhouette of the van der Waals' model multiplied by a “thickness” This thickness was determined by a least squares fit so as to give VW (=silhouette area×thickness)=VX where some twenty typical aromatic compounds having known X-ray data were considered. Good agreement was found between VW and Vρ for the aromatic molecules examined in this study.
    Finally, the packing density K in the crystalline state, given by K=Vnet/VX, was also discussed.
  • 高野 靖, 中島 靖, 荒井 三雄, 奥山 健二, 平林 潔
    1986 年 42 巻 3 号 p. T177-T181
    発行日: 1986/03/10
    公開日: 2008/11/28
    ジャーナル フリー
    It has been reported that silk fibroin in an air-dry state has three mechanical loss peaks at -120°C, -50°C and 230°C over the temperature range -150° and 300°C. They are referred to as γ, β and α relaxation, respectively. Mechanism of the β-relaxation, however, is not fully clarified, although it may be attributed to some motion concerned with adsorbed water because of the fact that the peak temperature of relaxation varies from -100°C to 0°C with water content.
    In order to obtain further information on the β-relaxation, model compounds having serine side chain were synthesized. These compounds are copolymers of acrylonitrile and allyl alcohol, and these partially hydrolysed products. Dynamic mechanical relaxation of model compounds as well as the sericin were measured.
    The β-relaxation peak in both the model compounds and the sericin was observed in only the case that serine side chain, hydrogen bonding sites and water are all present. Furthermore, the β-relaxation of the model compound shifts to lower temperature with increasing water content.
    These results possibly show that the mechanisms of the β-relaxation of the model compound and silk fibroin are same, and finally lead to the assumption that the β-relaxation is attributed to the cooperative molecular oscillation among the serine side chain, hydrogen bonding sites and water.
  • 温品 恭彦, 松井 醇一, 伊藤 基
    1986 年 42 巻 3 号 p. T182-T187
    発行日: 1986/03/10
    公開日: 2008/11/28
    ジャーナル フリー
    炭素繊維は引張弾性率が高く破断伸びが小さい。このような材料の応力-歪関係を調査するため,微少な歪の測定装置を考案した。試験片を負荷したときの歪を光学式非接触長さ計で読みとる機構を有している。高強度・高弾性率タイプ炭素繊維トレカT300の樹脂含浸ストランド試験片について測定し,この材料が弾性体であり塑性変形のないこと,歪に比例して,引張弾性率が高くなることを認めた。
  • 鳥羽 栄治, 藤本 典正, 関口 定
    1986 年 42 巻 3 号 p. T188-T191
    発行日: 1986/03/10
    公開日: 2008/11/28
    ジャーナル フリー
    An attempt was made to apply single-mode optical fibers to distortion sensors.
    When the single-mode optical fiber was subjected to the distortion difference, the fiber length, the index of refraction and the core diameter changed as a function of distortion, and accordingly optical phase shifts were observed.
    Optical phase shift was evaluated using the automatic phase shift detector of the Mach-Zehnder fiber interferometer type fabricated at our laboratory to detect fringe shifts.
    The sensitivity of distortion obtained by using this device was in good agreement with the calculated values. Therefore, the single-mode optical fiber can be utilized as a distortion sensor.
feedback
Top