巻号一覧
67 巻, 5 号
選択された号の論文の8件中1～8を表示しています
- |<
- <
- 1
- >
- >|
繊維と工業
時評
-
磯貝 明2011 年 67 巻 5 号 p. P_123
発行日: 2011/05/10
公開日: 2011/06/10
ジャーナル 認証ありPDF形式でダウンロード (626K)
解説
-
三崎 陽子2011 年 67 巻 5 号 p. P_124-P_127
発行日: 2011/05/10
公開日: 2011/06/10
ジャーナル 認証ありPDF形式でダウンロード (1811K)
がんばる若手研究者
-
佐藤 万紀2011 年 67 巻 5 号 p. P_128-P_131
発行日: 2011/05/10
公開日: 2011/06/10
ジャーナル 認証ありPDF形式でダウンロード (2345K) -
内田 哲也, 津川 直矢, 赤石 卓也2011 年 67 巻 5 号 p. P_132-P_135
発行日: 2011/05/10
公開日: 2011/06/10
ジャーナル 認証ありPDF形式でダウンロード (1849K)
連載
-
行松 啓子2011 年 67 巻 5 号 p. P_136-P_139
発行日: 2011/05/10
公開日: 2011/06/10
ジャーナル 認証ありPDF形式でダウンロード (4182K)
報文
一般報文
-
Amalina M. Afifi, Masaki Yamamoto, Hideki Yamane, Yoshiharu Kimura, Ah ...2011 年 67 巻 5 号 p. 103-108
発行日: 2011/05/10
公開日: 2011/06/10
ジャーナル フリーElectrospinning of pure chitosan or chitosan/poly(vinyl alcohol) (PVA) (blend) was carried out with an optimization of the electrospinning conditions. The electrospinning of the pure chitosan was only possible at a relatively high electric field of 5 kV/cm into fibers with a diameter as thick as 30 μm, and its reproducibility was very poor. Blending of PVA into chitosan significantly improved the spinnability and the chitosan/PVA blend fiber was electrospun for further characterization. Several target devices were designed and examined to collect aligned nanofibers of chitosan/PVA. The most efficient was a rotating collector having grounded short wire bars arranged on a drum. Over 90 % of electrospun fibers were collected in parallel to the take-up direction with this collector. The fiber alignment was further improved with increasing the collector rotation speed up to a maximum speed of 4.7 m/s. The aligned chitosan/PVA fibers were subjected to drawing to 1.5 times and the crystallization of chitosan fractions was induced without indicating the clear crystal orientation.抄録全体を表示PDF形式でダウンロード (1737K) -
入澤 寿平, 高村 達郎, 桃園 聡, 金子 純一, 塩谷 正俊2011 年 67 巻 5 号 p. 109-118
発行日: 2011/05/10
公開日: 2011/06/10
ジャーナル フリーThe abrasive wear rate, the coefficient of friction, and the tensile properties have been investigated on the polyamide 6 (PA6) fibers added with titanium carbide particles (TCP's), aluminum borate whiskers (ABW's) and vapor-grown carbon fibers (VGCF's). The wear rate of the fibers has been determined using a method previously proposed by the present authors. All the fillers used in this study effectively increased the wear resistance of the PA6 fiber. The effect of the fillers to increase the wear resistance of the fiber was analyzed in relation to the changes in the microhardness, the resistance against sliding and the fracture toughness against abrasive wear. The rolling effect of the fillers having a small aspect ratio was recognized from the decrease in the resistance against sliding.抄録全体を表示PDF形式でダウンロード (2376K) -
Hironori Oda2011 年 67 巻 5 号 p. 119-124
発行日: 2011/05/10
公開日: 2011/06/10
ジャーナル フリーNumerous potential triazine-stabilizers were synthesized to prolong the life of an azo dye. The effect of these compounds in reducing photofading was examined in cellulose acetate film. The simple use of UV absorbers or radical scavengers was not necessarily useful in improving the light fastness of the dye. The triazine-stabilizers containing a number of different types of stabilizing fragments, however, markedly suppressed the photofading of the dye. It was proposed that nickel complexes of multifunctional triazine-stabilizers may be used as effective stabilizers in the fading of dyes.抄録全体を表示PDF形式でダウンロード (813K)
- |<
- <
- 1
- >
- >|